Novak's Smart Boost 1-Cell Li-Po Step-Up Module allows nearly any brushless or brushed speed control, receiver and servo to run on 1-cell Li-Po. This technology expands racing opportunities for many drivers by reducing racing expenses and giving drivers the chance to race on smaller tracks.
Limited Qty Available
The Smart Boost increases the 1-cell Li-Po battery pack's voltage from 3.3V - 4.2V to 6V, ensuring that the receiver and servo receive a full 6V/3A power throughout the duration of a run. This allows the electronics to operate at their optimum levels. Additionally, the Smart Boost gives you the ability to run a 1-cell Li-Po cell with the same ESC, servo and receiver that you would normally run with any 2-3S Li-Po or 4-7 cell NiMH battery pack, including all of Novak’s brushed or brushless speed controls.
Not only electrically powered cars can benefit from this technology. The Smart Boost is also compatible in nitro vehicles. Installed between a nitro vehicle's 1-cell Li-Po pack and receiver, the Smart Boost can boost a nitro vehicle's voltage to 6V/3A to power the receiver and servo.
By increasing battery output voltage, the Smart Boost allows users to use any radio receiver in single-cell applications, including spread spectrum radios. The usual voltage fluctuations that cause reception issues with your radio using 1S Li-Po or 4-cell NiMH battery packs are no longer a concern.It is recommended, though, to use Novak's Glitch Buster Capacitor with 2.4GHz radio systems to ensure trouble-free operation.
The Smart Boost was designed to be used in small or medium-scale vehicles and with 1-cell Li-Po battery packs, such as SMC's® 1-cell Li-Po pack (#SUM4025S). It also has a Li-Po cut-off feature that will interrupt power to the motor when the battery voltage drops below 3.3V to prevent damage to the battery pack.
SMART BOOST 1-CELL LI-PO STEP-UP MODULE FEATURES
Increases a 1-cell Li-Po battery pack's voltage from 3.3V - 4.2V to 6V, which provides enough power to run almost any ESC, servo and receiver
Provides consistent power to vehicle’s electronics during entire charge
Li-Po Cut-Off Circuitry for battery protection
On/Off Switch for clean installation and easy operation
Universal JST Plug that fits all popular brand receivers
SMART BOOST 1-CELL LI-PO STEP-UP MODULE SPECIFICATIONS
Input Voltage: 1S Li-Po
Output Voltage: 6 Volts
Output Current: 3 Amps
Input Wire Gauge: 20 AWG
Output Wire Gauge: 26 AWG
Size: 1.18” x 1.04” x 0.45” / 30.0 x 26.5 x 11.5 mm
Weight: 0.48 oz. / 13.50 grams
LEDs: 1 on-board
LIMITED QTY AVAILABLE
