Cost-Saving Combo! The highly programmable, revolutionary M2 Dig 3S ESC / Dual Terra Claw Brush Motor Combo (#1845) is the first-of-its-kind, dual-motor compatible speed control – the M2 Dig 3S Dual Brush ESC #1846). It is combined with two Terra Claw Crawling Brush Motors – 55T (#3556).
With only the addition of these two brushed crawler motors, the M2 Dig controls both motors and performs dig maneuvers. In addition to the standard Dig Mode, the M2 features a Proportional Dig Mode which allows you to dial-in partial Dig Power on the fly for even finer control and precise maneuverability through tricky terrain. It also features an exceptional control on steep inclines and descents. Plus, the built-in electronic Dig Power is independently adjustable from the Hill/Drag Braking. This truly unique ESC supports both 2S and 3S LiPo!
The M2 Dig 3S Combo is ideal with any Super Crawler dual-system rig, such as Axial's XR10™, EnRoute’s® Berg™, Integy’s® Super and Unlimited Class of crawlers, and Clod Buster®-based vehicles. The M2 Dig 3S Combo can also be used in applications that requires two motors, such as robots, boats, tanks and submarines.
Note: An external BEC is required for operation with 3S battery packs. Novak recommends its 3A High voltage Universal BEC (#5463)
To find out more click below on More Details.
A SPECIALIZED DIG
The compact M2 Dig ESC is easy to install and operate. There are three fully programmable throttle profiles: Dig Mode, Proportional Dig Mode and Single Output Mode.
- Dig Mode uses Dig Power (independent of Drag Brake) to lock one motor at a time.This mode requires a proportional switch or a simple three-position switch to operate.
- Proportional Dig Mode. This completely original mode uses a transmitter's third channel that is proportional (button or dial), allowing drivers to vary the amount of Dig Power being applied to the motor. This innovative feature provides seemingly endless fine tuning of the Dig for the ultimate vehicle control.
- Single Output Mode is for applications with single motors or operation without a 3-channel transmitter. In this mode all four motor power wires can be soldered to one brush motor for higher performance, or connect two motors and control them both at the same time.
The powerful speed control also comes equipped with instant reverse via Novak’s Zero Reverse Delay, which provides immediate power delivery in both forward and reverse directions.
NO MODIFICATIONS NECESSARY
Like Novak’s Electronic Dig Unit (#5450), the M2 Dig 3S ESC does not require any vehicle modifications to install or operate. Simply plug it into any three-channel surface receiver, and you’re ready to crawl! This ESC is not only easy to install into a vehicle, but it possesses countless features on its own! Compared with a Dual ESC setup, the M2 allows racers to use top of the line crawling technology with just one speed control.
The M2 Dig 3S ESC is easily programmed into most three-channel transmitters, such as the Spektrum® DX3R DSM2 3CH Surface Radio™, Airtronics'® M8 and M11 R/C Radios™, and a Traxxas® (TQ-3) Transmitter™
MAINTANENCE-FREE MOTOR
Novak’s affordable Terra Claw Crawling Brushed Motor, which is also available individually, provides precise movement control, and exceptional torque and long-run times due to the motor’s high-turn count. Additionally, the Terra Claw is extremely durable, ensuring many smooth and maintenance-free crawling seasons. The M2 Dig is also compatible with Novak’s Rock Star Crawling Brush Motors (#3537, 3547, and 3557).
* The Traxxas® (TQ-3) Transmitter™ must be modified with a three-position auxiliary switch to operate with the M2.
